830 T5.5 Belt Spreader

The Transpread 830 T5.5 is a larger machine which is ideal for estate or contractor use, often this machine is supplied as a specialised liming spreader.
Often specified with a longer 3.6m hopper to give a greater nominal capacity of 5,000 litres without excessive width. A real workhorse for the professional user.
As all machines are built to individual customer requirements, many options such as screens, covers, wheels, tyres and axles are available as well as features such as different build heights which can be incorporated during construction of the machine.

Spreader Details

The general specification of the T5.5 is as follows:

  • 3.0m long mild steel hopper that is much wider and and deeper (stainless steel is an option) and a nominal capacity from 5000 litres.

  • 830mm wide cleated endless belt

  • 675mm diameter spinner discs

  • 50cc Danfoss spinner motors - 80cc for liming

  • Flow control valve on front panel to control spinner speed and protect spinner motors, this can be left fully open and the speed governed from the cab on a tractor with electronic spool valves

  • 12v cab mounted tachometer to monitor spinner speed

  • Twin or single rear hopper doors (single for liming to minimise obstructions to the lime)

  • Spinner deflectors available for fertiliser or liming operations

  • 3 speed gearbox driven by jockey from road wheel

  • Application rates governed by door opening and gear ratio chosen, full rates charts in operators manual

  • Standard tyres fitted are 600/55x22.5 on 8 stud rims with much larger options available

  • Standard axle is an 80x80 full beam with 350x60 hydraulic brakes. Options include full commercial axles with air or hydraulic braking.

  • A range of colours are available in two pack marine grade paint